Refine by:
Categories
Electrochemistry Kit
…units) Emery stick 6 experiment cables each with a 2-mm-plug, 20 cm long 2 experiment cables each with a 2-mm-plug, 30 cm long 6 tapping clips 2 plastic beakers, 25 ml each 2 drip pipettes with rubber caps pH combined electrode with a BNC plug and highly flexible cable Operating instructions Experiment…
Item: U11110
£ 437.30
BNC Patch Cord Connector
Equipped at either end with a BNC jack for connecting high-frequency patch cords with BNC plugs.
Item: U11258
£ 2.40
SW Ultrasonics Set (115 V, 50/60 Hz)
…Concave semi-circular mirror 2 Ultrasonic blocks/mirrors 1 Set for double slit 1 Ultrasonic semi-silvered mirror 1 Ultrasonic absorber 2 BNC cables 1 Cable, BNC/4-mm safety sockets 1 Plug-in power supply 12 V AC, 700 mA
Item: 1012846
£ 219.40
SW Ultrasonics Set (230 V, 50/60 Hz)
…Concave semi-circular mirror 2 Ultrasonic blocks/mirrors 1 Set for double slit 1 Ultrasonic semi-silvered mirror 1 Ultrasonic absorber 2 BNC cables 1 Cable, BNC/4-mm safety sockets 1 Plug-in power supply 12 V AC, 700 mA
Item: 1012845
£ 219.40
HF Patch Cord, BNC/4 mm Plug
Shielded patch cord equipped with a BNC plug at one end and a 4-mm-plug at the other end. Impedance: 50 Ohm Length: 1 m
Item: U11257
£ 17.40
Adapter, BNC Plug/4 mm Jacks
Adapter for crossover from a BNC plug to 4-mm-jacks.
Item: U11259
£ 4.30
Adapter, BNC Jack/4-mm-Plugs
Adapter for crossover from a BNC jack to 4-mm-plugs with 19 mm spacing.
Item: U11260
£ 4.20
Basic Equipment Set for ESR/NMR
…signal. Experiment descriptions are included. Specifications Analog input: BNC jack Digital output: BNC jack, 1:1000 scaling Analog output: Sweep generator: Coil current of 0 to 250 mA, 20 Hz via a multiple cable Fast: Voltage signals of 0 to 1 V proportional to the coil current and resonance…
Item: U18803
£ 572.00
Oscilloscope Probe, 100 MHz
…for IC measurements, trimmer key and BNC adapter. Bandwidth: DC to 100 MHz (1:10), DC to 6 MHz (1:1) Input resistance: 10 MΩ (1:10), 1MΩ (1:1) Input capacitance: 16 pF (1:10), 90 pF (1:1) Max. measuring voltage: 600 VDC, 600 VAC Connection: BNC plug Cable length: approx. 1.20 m
Item: U11800
£ 21.90
Demo Multimeter with Interface (115 V, 50/60 Hz)
…pressure and temperature meter U21035 pH/temperature meter Includes an adapter and interface cable for connecting this equipment. A large display of measured values from electronic balances is also possible via a cable adapter (available on request). The following balances are presently supported: Mettler…
Item: U21100-115
£ 675.00
pH and Temperature Meter (115 V, 50/60 Hz)
…of all standard commercial pH sensors with a BNC plug and all NiCr-Ni thermocouples of type K. Equipped with an integrated serial RS232 PC interface, as well as an analog output for connecting a recorder. Includes a Windows program and interface cable. The software allows a graphic representation of…
Item: U21035-115
£ 379.60
